Skip to content

Spin collaborates with the company Intek: an independent test and measurement laboratory established in 1994 in the field of enviromental tests.

During their lifecycle, products are often subjected to a wide range of mechanical, climatic/environmental stresses caused by atmospheric agents such as wind, rain and humidity. the world of physical testing is extremely diverse, and INTEK’s personnel specialise in performing these tests to assist in all stages of qualification.

  • Climatic tests and thermal shocks – Testing from -70 °C to + 180 °C maximum volume 1 m3 with the possibility of developing specific diagnostics systems. Thermal shock from -80 °C to 220 °C with transition time of less than 10 s.
    • IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-14, IEC 60068-2-30, IEC 60068-2-38, IEC 60068-2-78
  • Vibration and shock tests – Test bench up to 80 g up to 2000 Hz with slip table possibility dimensions 500 x 500 mm.
    • IEC 60068-2-6, IEC 60068-2-27, IEC 60068-2-64, IEC 60068-2-80, IEC 61373
  • IP grande check – IP rating check all grades including IPX9 and IPX9K
    • IEC 60529 | ISO 20653
  • IK grande check (impact) – Execution of all grades required by the reference standards with vertical drop hammer and spring hammer also with controlled thermal preconditioning
    • IEC 60068-2-75, IEC 62262, IEC 62208
  • Corrosion tests – Salt spray corrosion tests (NSS): Ka and cyclic Kb
    • IEC 60068-2-11, IEC 60068-2-52 | ISO 9227
  • Magnetic material testing – Glow-wire, tracking, flammability testing also according to UL standards
    • IEC 60695-2-10, IEC 60695-2-11, IEC 60695-2-12, IEC 60695-2-13, IEC 60112

For more information about enviromental tests please fill out the form

Drop files here or
Accepted file types: jpg, png, pdf, Max. file size: 10 MB, Max. files: 5.
    Back To Top